http://www.santo-plastic-mold.com/Digital-electronics-124.html chinavariety@gmail.com 1.Mobile phone   
2.ABS
3.130×70×20 ]]> Mon, 08 Mar 2010 23:57:57 -0500

http://www.santo-plastic-mold.com/Digital-electronics-123.html chinavariety@gmail.com 1.Telephone case  
2.ABS             
3.330330×100]]> Mon, 08 Mar 2010 23:57:57 -0500

http://www.santo-plastic-mold.com/Digital-electronics-122.html chinavariety@gmail.com 1.Joint pipe         
2.ABS+PC                     
3.ø=40×150]]> Mon, 08 Mar 2010 23:57:57 -0500

http://www.santo-plastic-mold.com/Digital-electronics-121.html chinavariety@gmail.com 1.Power socket  
2.ABS+PC
3.75×160×30]]> Mon, 08 Mar 2010 23:57:57 -0500

http://www.santo-plastic-mold.com/Toy-products-120.html chinavariety@gmail.com 1.Toys             
2.ABS           
3.80×220×40]]> Mon, 08 Mar 2010 23:57:57 -0500

http://www.santo-plastic-mold.com/Toy-products-119.html chinavariety@gmail.com 1.Toy bullet            
2.ABS                        
3.ø=8×40]]> Mon, 08 Mar 2010 23:57:57 -0500

http://www.santo-plastic-mold.com/Toy-products-118.html chinavariety@gmail.com 1.Toy car          
2.ABS
3.65×220×28]]> Mon, 08 Mar 2010 23:57:57 -0500

http://www.santo-plastic-mold.com/Household-117.html chinavariety@gmail.com 1.Cosmetics      
2.PP
3.ø=50×40]]> Mon, 08 Mar 2010 23:57:57 -0500

http://www.santo-plastic-mold.com/Household-116.html chinavariety@gmail.com 1.Fast-food Container     
2.PP                       
3.ø=120×70]]> Mon, 08 Mar 2010 23:57:57 -0500

http://www.santo-plastic-mold.com/Household-115.html chinavariety@gmail.com 1.Scoop            
2.PP            
3.30×120]]> Mon, 08 Mar 2010 23:57:57 -0500

•Rubber Molds start out as a LIQUID that hardens and forms to EVERY DETAIL of the stone surface.
•Plastic Molds starts out as a SO]]> Mon, 08 Mar 2010 23:57:57 -0500 http://www.santo-plastic-mold.com/news/Injection-Mold-Design-106.html chinavariety@gmail.com Every injection mold has to have a gate, or an opening through which the molten plastic is injected into the cavity of the mold. The type and size of gate plays a very significant role in the process of injection]]> Mon, 08 Mar 2010 23:57:57 -0500 http://www.santo-plastic-mold.com/news/Innovative-candy-mould-design-105.html chinavariety@gmail.com Rapid development of a complex product

Baker Perkins used innovative mould design technology to accelerate development of a new chocolate covered cherry product for a leading US candy manufacturer.

Queen Anne Candy is a division of Oregon based Gray and Company, the world's larges]]> Mon, 08 Mar 2010 23:57:57 -0500 http://www.santo-plastic-mold.com/news/Plastic-mold-design-thesis-104.html chinavariety@gmail.com A set of mold with one module and four cavities has been designed through the correct analysis of the technology of insulated pastern support of motor in the graduate design. The design and machining technology p]]> Mon, 08 Mar 2010 23:57:57 -0500 http://www.santo-plastic-mold.com/news/Mould-design-guide-is-backed-by-experience-103.html chinavariety@gmail.com Smithers Rapra has just published a new book entitled "The mould design guide", written by Peter Jones.

The book provides design engineers, toolmakers, moulding technicians and production engineers with an in depth guide to the design and manufacture of mould tools that work successfully ]]> Mon, 08 Mar 2010 23:57:57 -0500 http://www.santo-plastic-mold.com/news/plaster-mold-making-102.html chinavariety@gmail.com I was able to complete two sections of a five part mold that I am constructing for the tall section I have termed “Section 3″ of my floor lamp.  I have attached a couple of photos that show 1) The mold a]]> Mon, 08 Mar 2010 23:57:57 -0500 http://www.santo-plastic-mold.com/news/Mold-making-Injection-Molds-101.html chinavariety@gmail.com After a product is designed, usually by an industrial designer or an engineer, molds are made by an injection mold maker from metal, usually steel or aluminum, and precision-machined to form the features of the d]]> Mon, 08 Mar 2010 23:57:57 -0500 http://www.santo-plastic-mold.com/news/Alja-Safe-Alginate-3-Lb-box-799205--100.html chinavariety@gmail.com Alja-Safe is a Crystalline Silica-Free Alginate that is safe for life-casting.3lb Box.

Alja-Safe is a new addition to the Smooth-On family of "Life Casting" mold making materials. Alja-Safe alginate is sui]]> Mon, 08 Mar 2010 23:57:57 -0500 http://www.santo-plastic-mold.com/news/Silicone-rubber-for-shoe-sole-mold-making-application-99.html chinavariety@gmail.com Silicone rubber(HY-208/218)mainly used in mold making for manufacturers of shoe molds, sand casting, sole sampling, plaster models, simple products, products with non-complex patterns, as well as product models with stable size]]> Mon, 08 Mar 2010 23:57:57 -0500 http://www.santo-plastic-mold.com/blog/?p=1 chinavariety@gmail.com Mon, 08 Mar 2010 23:57:57 -0500 http://www.santo-plastic-mold.com/blog/?p=3 chinavariety@gmail.com Industrial mold making plastic parts, injection molds in the processing and storage, as well as during]]> Mon, 08 Mar 2010 23:57:57 -0500 http://www.santo-plastic-mold.com/blog/?p=8 chinavariety@gmail.com injection molding machines and resins. Since its invention in 1872, the injection molding process and the plastics industry has ]]> Mon, 08 Mar 2010 23:57:57 -0500 http://www.santo-plastic-mold.com/blog/?p=10 chinavariety@gmail.com Mashups are breaking the mold at Microsoft  mold (mould). Everything You Need To Know About How To Make Fiberglass Molds For Full Size And RC Model Cars, Boats, Planes